|
|
|

|
|
The Wheelchair-Lifter raises and tilts your wheelchair horizontally, all at the touch of a
button. You don't need to struggle any longer to get your wheelchair in and out of the trunk of your car. Bruno's
Wheelchair-Lifter can also be adapted as the Model AWL-150 to raise your wheelchair vertically for storage in a full size van
or minivan.
|
|

|
|
You don’t need to struggle any longer to get your wheelchair in and out of your van or minivan. The
Wheelchair-Lifter Models AWL-150 raises a wheelchair vertically into the rear door of your full-size van or minivan, all at
the touch of a button. Plus, Bruno’s Wheelchair-Lifter Model AWL-150 can lift and store your wheelchair into the trunk of a
car.
|
|

|
|
You don’t need to struggle any longer to get your wheelchair in and out of your van or minivan. The
Wheelchair-Lifter Model AWL-160 raises a wheelchair vertically into the side door of your minivan, all at the touch of a
button. Plus, Bruno’s Wheelchair-Lifter Model AWL-160 can lift and store your wheelchair into the trunk of a car. |
|

|
|
BRUNO MODEL PUL-1700
The Cab-Sider gives you the advantage of driving a pickup while being able to store your chair inside, out of the weather. The
truck bed is free to use for other things and can even be equipped with a cap, if desired.
|
|

|
|
BRUNO MODEL AWL-1600
The Back-Saver is simple to operate and does not require any manual lifting. Just fold the chair up and roll the chair onto
the platform. Turn the key to the ON position and depress the rocker switch to the UP position. Unloading the chair is just as
simple and trouble-free.
|
|

|
|
BRUNO MODEL PUL-1100
The Out-Rider can be installed behind the cab on either the driver's or passenger's side of the truck. It is fully
automatic and draws its power from the vehicle's battery. No welding is required and the unit is completely weatherized.
|
|
|
|