Power Transfer Seats make transfers from wheelchair to driver's or passenger's seat convenient and easy. It saves valuable time, too. At the touch of a fingertip, the fully automatic Power Transfer Seat Base swivels 90 degrees to allow
carefree transfers for those with disabilities. Individual controls for front to rear travel and height give you complete control and comfort. Power Seat Base transfer seats are now designed to accommodate OEM air bag control housing (usually installed under the driver-side
seat). For more information on our disability transfer seats, contact one of our stores in California, Arizona, or Nevada.
B&D Transfer Seat
Model Leadership L51
Presenting Our New Leadership Series! Test certification to meet the combined FMVSS and CMVSS 207 & 210 requirement with a semi-integrated seatbelt system. Ours surpasses the requirements for the integrated seat belt receptacle by 25%. New 24 Month Warranty on Parts and 12 Months Limited Warranty on Labor leads the industry in transfer seat base warranties.
Features
New 500 lbs total combined weight capacity eliminates the need for both a standard and a heavy-duty model
New Central Wiring Distribution Channel (Center bolt has been replaced with a steel bushing)
New repositioned wiring harness eliminates the opportunity for accidental damage
New direct vehicle chassis ground system
New 12″ Swivel Gear provides smoother turning
New swivel adjustment screw allows the seat to be adjusted up to 5
New Delrin bearings provide improved stability and quieter operation
New actuator protective cover prevent objects from falling into the actuator
Signature B&D Direct Mounting System: No Drilling Required
New two position adjustable switch box allows you to position it as close to the seat as possible
This base is designed to mount over the OEM computer module located under the front seat. For GM applications, a 1” spacer may be required to fully clear the module box. Model 041 uses dual actuators for the up and down movement.
For Chevy full size vans, this base has special floor mounts that allow it to be installed onto the 4 OEM floor studs, with NO HOLES drilled in the floor! Due to the reduced height of the OEM Ford pedestal, it is not possible to utilize a “direct mount”.
Model 041D is available in both a standard and heavy-duty design. The standard is rated for 300 lbs total combined weight capacity. Model 041D-HD is rated at 500 lbs TCWC. Model 041 can be driven in any vertical position.
*The 041D is available for the driver
position only. Passenger positions
should use Model 071P.
Technical Specifications
Down Height: 6 5/8”
Width: 17”
Length: 40 1/2”
Travel Horizontal: 16”
Vertical: 8”
Swivel: 100
8 Way Scissor for the Driver position only
Applications
2003 and newer GM Full Size Vans
2004 and newer Ford Econoline Vans
B&D Transfer Seat
Model L71
The L71D (Driver) and L71P (Passenger) are our most versatile seat bases. They can be installed in many full size vans for both driver and passenger and selected non-lowered floor mini vans.
The redesigned L71D & P incorporates many of the features in our Leadership Series including being rated at 500 lbs. Note: Most late model, full size Ford and GM vans require Model 041D in the driver position because of the module under the driver seat.
Optional Upgrades: Models L71D and L71P can be configured with 180
Technical Specifications
Down Height Front: 6 3/8”
Down Height Rear: 6 1/8”
Width: 16 1/4”
Length: Driver, 28”; Passenger, 26"
Travel Horizontal: Driver, 14 5/8 ”; Passenger, 12 5/8 " (Seat moves additional 3” rearward when fully raised due to the function of the scissor legs)
Vertical: 6 5/8”
Swivel: 100
Weight Capacity: 500 Lbs.
6 Way Scissor
B&D Transfer Seat
Model Leadership L73
The 073D (Driver) and 073P (Passenger) seat base can be installed in many full size vans for both driver and passenger. In addition Model 073 can be used in several non-lowered floor mini vans.
In some applications it is necessary to add riser tubes to clear the computer module.
Transfer Seat
